Showing 1-18 of 18 results for "86910"
Jun-Bing Fan et al.
Chemical communications (Cambridge, England), 46(31), 5805-5807 (2010-07-01)
A low cost and environmentally benign process for tetrabutyl titanate-controlled ring-opening polymerization of epsilon-caprolactone at ambient temperature of 10-40 degrees C is introduced affording poly(epsilon-caprolactone) with pre-designed molecular weights and narrow molecular weight distribution.
Preparation and characterization of low temperature sintering nanocrystalline TiO2 prepared via the sol-gel method using titanium (IV) butoxide applicable to flexible dye sensitized solar cells
Bazargan MH, et al.
International Journal of Materials Research, 103(3), 347-351 (2012)
S D Makeev et al.
Klinicheskaia khirurgiia, (1)(1), 19-20 (1989-01-01)
By the method of tissue culture, it is established that the capron threads stained by brilliant green, coated with the chemosorbed substances on the base of titanium alkoxides, polyalkylhydridsiloxanes and polyorganilsiloxanes have no histotoxic properties and can be used in...
Structural and electrical properties of TiO2 thin film derived from sol-gel method using titanium (IV) butoxide
Senain I, et al.
International Journal of Integrated Engineering, 2(3) (2010)
Ali Al-Otaify et al.
Physical chemistry chemical physics : PCCP, 16(27), 14189-14194 (2014-06-10)
Sub-nanosecond charge dynamics in monodisperse Au nanoparticles (NPs) supported on TiO2 colloidal spheres are studied as a function of NP diameter using ultrafast transient absorption spectroscopy. The decay of the transmittance changes observed in the region of the plasmon resonance...
Li Qiao et al.
Analytica chimica acta, 853, 342-350 (2014-12-04)
A novel 8-electrode array as stir bar was designed for selective extraction of trace level exogenous estrogens from food samples, followed by liquid desorption and HPLC-photodiode array detection. The array consisted of 8 screen-printed electrodes and each electrode was modified...
Jaegeon Ryu et al.
Nanoscale, 7(14), 6126-6135 (2015-03-17)
We demonstrate a simple but straightforward process for the synthesis of nanotube-type Si-based multicomponents by combining a coaxial electrospinning technique and subsequent metallothermic reduction reaction. Si-based multicomponent anodes consisting of Si, alumina and titanium silicide show several advantages for high-performance...
Mingyu Su et al.
Biological trace element research, 124(2), 173-183 (2008-04-22)
To further evaluate the photosynthetic effects of nanoanatase, the improvement of spinach chloroplast photosynthesis damaged by linolenic acid was investigated in the present paper. Several results showed that after the addition of nanoanatase to the linolenic acid-treated chloroplast, the light...
Zhifeng Jiang et al.
Dalton transactions (Cambridge, England : 2003), 43(36), 13792-13802 (2014-08-12)
We report a novel synthesis approach employing bamboo leaves as sources of both the C/N dopant and reductant to the formation of C/N co-doped TiO2 modified with Ag and g-C3N4 (Ag/CN-TiO2@g-C3N4). In this case, the ternary composite has a hierarchical...
Yi Hong et al.
Colloids and surfaces. B, Biointerfaces, 123, 68-74 (2014-09-13)
In this study, we investigated the differences between amorphous and anatase TiO2 at the biomolecular level which could explain differences in the osteoblast response on these surfaces. The number of surface hydroxyl groups in the TiOHT form on amorphous and...
Beidou Xi et al.
Huan jing ke xue= Huanjing kexue, 23(1), 66-69 (2002-05-04)
Photocatalysts Pt/TiO2 coated on hollow glass beads were prepared by tetrabutyl titanate hydrolysis with Sodium silicate on hollow glass beads at various condition and loaded with platinum varying from 0.2% to 2.4% by weight. Sodium pentachlorophenolate (PCP-Na) solution were used...
Jianjian Lin et al.
Scientific reports, 4, 5769-5769 (2014-08-30)
Three-dimensional (3D) hierarchical nanoscale architectures comprised of building blocks, with specifically engineered morphologies, are expected to play important roles in the fabrication of 'next generation' microelectronic and optoelectronic devices due to their high surface-to-volume ratio as well as opto-electronic properties....
Picheng Gao et al.
Dalton transactions (Cambridge, England : 2003), 44(2), 773-781 (2014-11-20)
A facile synthetic route for TiO2-CdSe heterostructures was proposed based on dentate binding of TiO2 to carboxyl. Carboxyl functionalized CdSe quantum dots (CF-CdSe QDs) were successfully bonded onto TiO2 nanoparticles (NPs), which could significantly improve the photoelectrochemical (PEC) properties of...
S Anantharaj et al.
Biomacromolecules, 13(8), 2446-2455 (2012-06-21)
A new dual ester-urethane melt condensation methodology for biological monomers-amino acids was developed to synthesize new classes of thermoplastic polymers under eco-friendly and solvent-free polymerization approach. Naturally abundant L-amino acids were converted into dual functional ester-urethane monomers by tailor-made synthetic...
Kui Cheng et al.
Colloids and surfaces. B, Biointerfaces, 126, 387-393 (2014-12-17)
Design of an implant surface with appropriate nanostructures has been considered to be an effective way to promote osteoblast cell growth and osseointegration. In this work, TiO2 nanorods were integrated into TiO2 nanodot films by hydrothermal growth to engineer a...
Jun Lu et al.
Nature communications, 5, 5693-5693 (2014-12-17)
The capacity fade of lithium manganate-based cells is associated with the dissolution of Mn from cathode/electrolyte interface due to the disproportionation reaction of Mn(III), and the subsequent deposition of Mn(II) on the anode. Suppressing the dissolution of Mn from the...
Synthesis and characterization of CNT/TiO 2 composites thermally derived from MWCNT and titanium (IV) n-butoxide
Oh W and Chen M
Bulletin of the Korean Chemical Society,, 29(1), 159-164 (2008)
Wan-Kuen Jo et al.
Journal of hazardous materials, 283, 680-688 (2014-12-03)
This study was conducted under visible-light exposure to investigate the photocatalytic characteristics of a multiwalled carbon nanotube/titania (TiO2) composite nanofiber (MTCN) using a continuous-flow tubular reactor. The MTCN was prepared by a sol-gel process, followed by an electrospinning technique. The...

Social Media

LinkedIn icon
Twitter icon
Facebook Icon

MilliporeSigma

Research. Development. Production.

We are a leading supplier to the global Life Science industry with solutions and services for research, biotechnology development and production, and pharmaceutical drug therapy development and production.

© 2021 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.

Reproduction of any materials from the site is strictly forbidden without permission.